OilMon PC
|
Part No.
|
||
| Software and Access Key OilMon PC fluid management program. Description |
23341
|
 |
| Communication Adapter PC-interface For connection of external keypads and I/O modules to the PC. 230- 240 V AC power supply required. |
23363
|
 |
| Remote Keypad To be mounted in the workshop enabling technician remote access to outlets/reels using alpha numerical ID authorisation. Sturdy metal casing for durability. 20 key alpha numeric keyboard and 2×16 digit bias lighted LCD-display. |
23352
|
 |
| Remote Keypad (2 Channel) Same as 23352 with the possibility to connect two dispensing points, a serial ticket printer (23353) and/or bar code reader. |
23365
|
|
| I/O Module Expansion module for increasing the system capacity by an additional 8 dispense points , up to a maximum capacity of 120 dispense points. 230-240 VAC power supply required. |
23349
|
 |
| I/O Module Combinet Same as 23349 with a built in terminal and possibility for connection of a serial ticket printer (23353), bar code reader and one waste oil control. 230 - 240 VAC power supply required. |
23367
|
 |
| Tank Controls For connection to one waste oil tank and control of one air solenoid valve. See picture on page 117. |
23337
|
|
| Digital LED Display An LED-display with 40 mm digits, can be mounted at each dispense point, to enable the technician to monitor the dispensed volume. An alternative to a hose end meter. Equipped with “reel open” indication. NOTE! One display per flow meter will be required where this option is used. |
23406
|
 |
| Ticket Printer Delivered complete with cables, paper and ribbon, ready for connection to the system. Description Ticket printer, parallell for OilMon PC Ticket printer, serial in combination with 23365 and 23367 Spare ticket roll Spare ink ribbon |
23354
23353 23334 23335 |
 |
| Communication Cable 6-core 0,5mm2. Use between Central Unit, I/O and keypads. Communication Cable |
23391
23393 |